Special Shape High Alumina Preassebly Brick Resist 1350 ℃ Which Used For Saftey Lining Of Steel Ladle

We use super bauxites to produce high alumina bricks for hot blast stove,being high pressure pressed and sintered in high temperature,main mineral compositions are mullite phases.These products could be used for every part of hot blast stove due to their steady volume,low creeping and well thermal shock resistance properties.

High Alumina Preassebly Brick is an aluminum silicate material which content of more than 48% alumina. It is formed and calcined from alumina or other raw materials with high alumina content. The advantage of this material are high thermal stability, refractoriness above 1770℃,good slag resistance.

One of the important working properties ofHigh Alumina Preassebly Brick is the structural strength at high temperatures. The high-temperature creep properties are also measured to reflect the high-temperature structural strength. From the test, we knew that, with the increase of the Al2O3 content, the structural strength also become higher.

When the content of Al2O3 less than 70%, the load softening temperature depends on the quantity ratio between the mullite crystal phase and liquid phase. With the increase in the quantity of mullite, It also increased. Therefore, reducing the content of impurities in the raw materials is beneficial to improve the quality of the High Alumina Preassebly Brick.

Feature
1. Good Cold Crushing Strength
2. High Refractoriness Under Load
3. Good Thermal Shock Resistance
4. Low Reheating Linear Rate

Applications:

1. Furnaces of metallurgy industry, heat treatment furnace
2. Furnaces of chemical industry and construction industry.
3. Furnace of incineration of garbage, recirculating fluidized bed furnace
Standard sizing: 230 x 114 x 65 mm others up to the client